Turnstiles Flap Barrier Turnstile Rfid Card Reader Security Turnstile Gate
CE Certificate RFID Card Reader Fitness Center Bi-Directional Opening Flap Barrier Gate
Sinomatic flap barrier can be compatible with IC card , ID card ,barcode card , fingerprint reading card recognition device used for staff, provide civilized , orderly access methods; effectively manage the access of staff .
Sinomatic flap barrier gate can be widely used in the station, wharf subway, factories, office building, hotel, clubs, intelligent community , enterprises and institution that need intelligent access management.
1. Problem-self-checking function.
2. Barrier Opening: Bi-direction
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger doesn't pass within regulated time, turnstile will cancel order automatically. And the regulated time can be set by managers.
6. Anti-rush function: if there is no open signal, arm will be holding tightly.
7. Stable running with little noise.
MAIN FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical antipinch function. If the gate meets resistance in the reset process,motors will stop working automatically
within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within the prescribed time, the system will cancel the authority
of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc.
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function
Specifications of Flap Barrier Gate:
||AC220±10%V 50Hz/AC110±10% 60Hz
|Access device input voltage
Dry contact or 12V electrical level signal
or > 100ms 12V impulse signal, driving current > 10mA
||DC 24V (brushless motor)
|Max flow rate
||25 to 30 person per minute
|Flap opening / closing time
|Reset time when power on