Face Recognition Turnstile
Access Control Turnstile
Tripod Turnstile Gate
Swing Barrier Turnstile
Flap Barrier Turnstile
Speed Gate Turnstile
Full Height Turnstile
High Security Turnstile
Face Recognition Biometric Device
Office Security Gates
Waist High Turnstile
Car Barrier Gate
LPR Parking System
Parking Lot Speed Gate Turnstile 24V DC Brushless Motor RFID Automatic Boom Barrier
|Minimum Order||1 Set||Packaging Details||Wooden Carton|
|Delivery Time||5-7 Working Days||Payment Terms||T/T, Western Union, MoneyGram, D/P, D/A, L/C|
|Supply Ability||2000 Sets Per Month|
Parking Lot Speed Gate Turnstile,
Speed Gate Turnstile 24V,
RFID Automatic Boom Barrier
Speed Adjustable Parking Lot Gate Barrier 24V DC Brushless Motor Rfid Automatic Boom Barrier
DZ-138 traffic barrier gate specifications:
|DZ-138 barrier gate||V06T||V09T|
|Max Boom Length and Diameter||2500mm, Ф75mm||3000mm, Ф75mm|
|Machine Case||Varnished 2.0mm steel plate||Varnished 2.0mm steel plate|
|Machine Case Size(W*D*H)||342*312*959mm||342*312*959mm|
|Operating Temperature Range℃||-45℃~+85℃||-45℃~+85℃|
|Driving Method||Servo motor||Servo motor|
|Motor No-load Speed||3000r/min||3000r/min|
|Remote Control Distance||≤100m (open, sunny weather)||≤100m (open, sunny weather)|
|Surface Treatment||Outdoor metal powder electrostatic spraying||Outdoor metal powder electrostatic spraying|
|Voltage(±10%)||100-240 volt||100-240 volt|
|Max Power Consumption(watt)||8||8|
|Control Voltage||24V DC/max.3000mA||24V DC/max.3000mA|
|Open Collector Output Number||2||2|
|Zero Level Reversal Relay Number||3||3|
|Operating Temperature Range℃||-45℃~+85℃||-45℃~+85℃|
Functions and Features:
1. Gate automatically open when power off, no clutch design, no need human intervention. When power on,
gate automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If special
requirement, manual operation is required when power off, operating arm open and close manually also can
be realized by setting up control board DIP switch, which ensure that the system can be used at any time.
2. The use of Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable.
3. A variety of input and output modes can be selected, normally open normally closed are optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.
5. Closing speed can be adjusted.
6. Barrier gate up &down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. R&G Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared sensor signal anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function. No matter the current gate in what state, the operator through the triple
push button, software or remote control to issue an open command, the gate will give priority to the implementation of the opening action.
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid
damage to the vehicle, and barrier gate machine.
14. Delay closed selection function.
15. High-sensitivity arm auto reverse function (intensity can be adjusted).
16. Parking system interface.
17.RS485 or RS232 network communication control up &down interface (no need to install communication module)
18. Anti-collision alarm signal interface.
19. Adjustable speed port (from 0.9s to 10 s)
20. High-strength precision cast steel, industry moving parts beyond the industry quality
1. Two year’s free servicing is supplied (not including the arm and remote controller). In the condition of
complying with the operating instruction, without the unauthorized maintenance of the parts and the machine
have no obvious mechanical damage, we will provide a quality assurance for the barrier gate product from
the date of use for a period of two years or from the date of shipment up to three years including all mechanical
and electronic components other than special consumables.
2.Lifetime charged servicing is offered.
3.Technology servicing is supplied.
*The following situations are charged for servicing (or replacement):
1.Broken by wrong installation;
2.Broken by improper voltage;
3.The surfaces of the system destroyed by wrong installation or use.
4.Broken by natural disaster.
6.Servicing items out of the promises.
Interchange Instruction for Arm directions
The product direction can be interchanged, divided into 6 steps.
Step 1: remove the M8X20 inner hexagonal screw,take out the machine core;
Step 2: remove the electrical supporting plate from left side to the right side;
Step 3: remove the M10*30 fixed screw on the boom tray (see figure 1);
Step 4: using the M14*150 screw to pull out the boom tray head(see figure 2);
Step 5: install the boom tray head from the original left to the right side,or the original right to
the lest side;
Step 6: put the machine core back into machine case, fixed the M8*20 hexagonal screw,
direction interchange is completed, no need to adjust other Settings.
1. When barrier finish closing, why does the arm open itself slowly?
- the spring is too tight, you need release the spring a little, then test it again.
- see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
- reset the balance position and the electrical limit switch.
2. Why does the controller panel operate with "Di Di Di" abnormal noises?
- As for this, it means the resistance on controller board is broken, if you have professional tools to check,
- then replace that broken resistance, if not, replace that controller panel.
3. Why does the barrier finish half operation of opening and closing?
- If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.
4. When barrier closed, why is there a 5 degree angle of inclination?
- the model is not good, and the gear doesn't fit each other tightly.
- the barrier didn't adjust well, need to reset.
5. When barrier finish open, but it closes itself without any order control, what's the problem?
- To check the loop cable first, because the loop cable maybe brokem
- To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.
6. Why does the arm wave a lot when opening and closing?
- The spring is very tight
- The Screw touches the rubber absorption tightly, need to reset again.
7. Rubber linning installation suggestion:
- It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
- The place with many vehicles come and go, like shopping center, carpark area.
8. Can you accept OEM/ODM order?
- Absolutely, we are manufacturer of barrier gate, with 7 years researching and developing experience